Brick Paver Installation & Edging



Staging of product

The majority of paver tasks will differ depending upon access, site conditions, project size and naturally, the weather condition. These circumstances can have a general impact on your project from a timing stand point. Mindful factor to consider must be taken to determine the time to begin the paver installation. Constantly attempt to prevent any traffic or lessen on the ready locations.

The supervisor or project manager need to constantly have the materials (sand/ pavers) dispersed around the job site for efficient and simple setups. Paver pallets/bundles must be positioned in a manner not to interfere with the paver installation. The correct pallet/bundle placement can make the real job installation much easier and quicker by minimizing the total labor of managing the material.

Brick paver patterns

Pavers can be put in several patterns depending upon their shape. Each paver shape will typically have several different hatch patterns that are offered by the producer.

Specialists require to take into consideration the traffic weight loads on their paver jobs. In many applications around the world, it has been revealed that pavers laid in a herringbone pattern have carried out properly.

Pavers that are 60 mm (2 - 3/8 in) density are suitable for pedestrian applications. Pavers that are going to be utilized in industrial or commercial applications must be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a variety of conditions that identify the beginning point of a paver job.

When beginning to install pavers it is best to snap a real straight chalk line on the surface of the bedding sand or pull a real straight string line above the surface of the bedding sand at the finished elevation of the pavers This will help as a guide for keeping straight joint lines and will also allow the installer to make modifications in the positioning of the pavers.

Structures and concrete curbing are normally not straight and should not be utilized for establishing straight joint lines. Using string lines is essential to figure out the true straightness of the edge as well. As the paver installation advances, the string lines will assist decrease the requirement for little trim pieces.

Joint width in between pavers need to be between 1/16 and 3/16 in (2 and 5 mm ). There are some pavers with spacer bars on their sides. These will keep a minimum joint width and allow the bed linen and jointing sand to enter between each paver. Pavers with spacer bars are normally not laid in snug against each other because a string line will offer constant joint spacing.

Installation of brick pavers.

Among the most widely utilized methods for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along among the true straight lines that you have pulled or above the bedding sand. This will give you a true and straight line off which to work. When this row is developed, you can continue to work outward into the field with the rest of the pavers. Always ensure to occasionally check your joint lines to make sure they are real and straight. If not, adjustments to the pavers can be made as you continue installing. Pavers ought to be set up hand tight. The very best technique is to place a paver versus another one and let it move down into the bedding sand. Do not kick or tap the pavers into place as this can toss your lines out of real straightness.

When installing pavers on a steep grade, they must be installed at the base of the grade going uphill. This will prevent the pavers from sneaking as they are being laid.

On large business and industrial applications, hand laying pavers would not be cost effective due to the labor strength. The very best way for setting up pavers on large jobs is to install them mechanically. Using a mechanical laying machine can set up roughly 6000 - 7000 sq ft a day. There are a couple items a specialist must consider before setting up pavers mechanically:

1.) Mechanical installers are only capable of setting up pavers in specific patterns.

2.) The contractor needs to ensure that the manufacturer can manufacturing and bundling pavers in the wanted pattern on the pallets for easy mechanical installation.

Poor color mixing could result in a patchy looking installation. A lot of manufacturers are constant with color blending on each package of pavers, but it is the specialist's responsibility to ensure correct blending in the field.

Cutting treatments for brick pavers.

Professionals usually have 2 methods of cutting pavers. When cutting pavers damp, it will assist decrease dust and will extend the diamond blades life. The operator of the brick saw need to always cut the pavers away from the surface area of the paver field when cutting damp, due to the fact that the pavers will produce a slurry that will stain the paver surface area.

The brick saw operator ought to constantly use the correct protection that is required for running a saw, such as eye, ear, respiratory and hand security ).

Edging types

Edge restraints play a significant function in South Florida Pavers the overall success of an interlocking pavement installation Edging restraints get rid of lateral motion of the pavers and hold the pavers tightly together. Particularly at the external perimeter of the paver application, without an edging restraint, your job is ensured to stop working with time.

There are several different edging restraints from which specialists can choose. Generally produced edge restraints are the most frequently used by contractors. Produced edging restraints can vary from, plastic edging, steel and aluminum, lumbers or precast concrete and stone. An edging type that is used mainly in commercial and commercial applications is poured-in-place concrete curbs. This edging restraint is generally set up by other specialists.

Edging installation.

This might result in the migration of the bed linen sand and eventual lateral movement of the pavers. If there is a possibility of losing bedding sand between the pavers and the edge restraint, then geo textile material is recommended. When a space in between the pavers and the edging exceeds 3/8" (10mm), then the area must be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compacted. The entire location that is to be compressed ought to be swept clean of any foreign items and particles that can cause scratching or scuffing on the surface of the pavers.

It is essential to have a compactor that can exert between 3000lbs. And 5000 lbs. Of centrifugal compaction force. In addition, it is essential that the first compaction happens prior to any jointing sand has actually been applied to the pavers. This can cause a bridging issue and will not permit the joints to be completely filled with jointing sand if jointing sand is used to the pavers before compaction takes place. This can also prevent the pavers from being appropriately set into the bedding sand.

When compacting the pavers, it is advised that you make at least 2 passes in different instructions throughout the pavers. This will enable the pavers to be effectively set in the bedding sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really critical to the final efficiency of the pavers. Failure to do correct compaction can result in contortions and pavement failure over time.


Paver pallets/bundles must be positioned in a manner not to interfere with the paver installation. One of the most extensively used techniques for the installation of pavers is hand installation of each paver. The operator of the brick saw need to always cut the pavers away from the surface of the paver field when cutting damp, due to the fact that the pavers will produce a slurry that will stain the paver surface area. Edging restraints eliminate lateral movement of the pavers and hold the pavers securely together. When a gap between the pavers and the edging goes beyond 3/8" (10mm), then the space ought to be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *